Gamry Paint Test Cell (PTC1) – Corrosion measurement cell or EIS measurement cell for coatings

Product Description

The design of the corrosion measuring cell or EIS measuring cell for coatings is elegantly simple and therefore cost-saving. The flat sample body is clamped onto a polypropylene (PP) base with a glass tube, sealing an O-ring with a metal clamp.

For bare metal surfaces, defined surface-releasing masks must also be glued on to prevent crevice corrosion. The glass tube is then filled with electrolyte up to ¾ of the fill level and sealed with a rubber stopper. This rubber stopper contains recesses for a reference electrode and a graphite rod as a counter electrode.

Downloads

Videos

The Gamry Interface 1010 Potentiostat Starter Pack

Specifications

DIMENSIONS



12 cm (L) x 7 cm (W) x 13 cm (H)




SYSTEM


Material: Pyrex®, polypropylene, Viton, silicone rubber, graphite (PTC1 set)

PVC (PTC1 adhesive masks)


Type
:

Glass body, O-ring and base body (PP)



Volume: 20 ml – 50 ml



CONFIGURATION



Working electrode connection Type I with base:

Working electrode connection Type I (H) > 0.05 mm – 7 mm

Working electrode connection (L x W or min. Ø) 6 cm x 6 cm or Ø 7 mm


Working electrode
connection Type II without base:

Working electrode connection Type II (H) > 7 mm – 15 mm

Working electrode connection (L x W or min. Ø) 6 cm x 6 cm or Ø 7 mm



PortHoles electrode surfaces: 1 cm², 3 cm², 10 cm² and 14.6 cm² (3M Model 470; PVC)



Reference electrode connection: rubber plug (Ø) 9 mm – 11.5 mm



Counter electrode connection: rubber plug (Ø) 6.3 mm – 8 mm, (L) 150 mm

Options and Accessories

• Interface 1000 Potentiostat/Galvanostat/ZRA

• Interface 1010 Potentiostat/Galvanostat/ZRA

• Reference 600 Potentiostat/Galvanostat/ZRA

• Reference 600+ Potentiostat/Galvanostat/ZRA

• Reference 3000 (AE) Potentiostat/Galvanostat/ZRA

• ECM8

• Faraday cage (Vista Shield)

• Cell Body PTC1

• Graphite rod, counter electrode, 0.242″ x 6″

• Counter electrode bridge tube with platinum wire counter electrode

• Stopper, rubber

• Clamp

• PTC1 base assembly

• O-ring for PTC1, (pack of 3)

• PortHoles electrochemical sample masks, 3×3″, 1 cm², 60 per pack

• PortHoles electrochemical sample masks, 3×3″, 3 cm², 60 per pack

• PortHoles electrochemical sample masks, 3×3″, 10 cm², 60 per pack

• PortHoles electrochemical sample masks, 3×3″, (1 cm², 3 cm², 10 cm²) x 20

• Calomel (SCE) reference electrode

• Silver/silver chloride reference electrode

• Mercury sulphate reference electrode (without chloride anions)

• Mercury oxide reference electrode for alkaline media

• Silver/silver nitrate reference electrode for non-aqueous electrolytes

• SCE refill solution (120 ml)

• Ag/AgCl refill medium (120 ml)

• Vycor frit with Teflon heat-shrink tubing, 3.5 mm (5 pieces)

• KT glass frit with Teflon heat-shrink tubing, 3.5 mm (5 pieces)

• Polymer exchange frits for mercury oxide reference electrode

Applications